Repairs
CAS 32 - T148 6X6
The Water Tender is built on three-axle chassis, equipped with centrifugal water pump, 6000 litre water tank capacity, 600 litre foam concentrate tank capacity, roof monitor and hose reel with 60 metres of hose.
Technical data
Vehicle dimensions
| Length | 8 770 mm |
| Width | 2 500 mm |
| Height when loaded | 2 750 mm |
| Ground clearance when loaded | 290 mm |
Vehicle weights
| Operating weight | 11 210 kg |
| Gross vehicle weight | 18 530 kg |
CHASSIS
| Model | TATRA T148-PP5 |
| Engine type | Diesel, air-cooled |
| Engine output | 148 kW/2 000 min-1 |
| Drive | 6x6 |
| Fuel tank capacity | 230 l |
| Maximum vehicle speed | 72 km/h |
CAB
| Type | all-metal |
| Number of seats | 1 + 2 |
TANKS
| Water tank capacity | 6 000 l |
| Foam concentrate tank capacity | 600 l |
PUMPING EQUIPMENT
| Rated water flow rate | 3 200 l/min |
| Rated working pressure | 0.8 MPa |
| Maximum pump pressure | 1.8 MPa |
| Rated suction lift | 1.5 m |
| Maximum suction lift | 7.5 m |
HOSE REEL
| Hose dimensions | DN 25/60 m |
| Branchpipe | D25, multipurpose |
| Rated flow rate | 100 l/min |
| Maximum throw range | 22 m |
MONITOR
| Movement in horizontal plane | 360° |
| Vertical movement below the horizontal | 30° |
| Vertical movement above the horizontal | 90° |
Technical modifications reserved. 10/2014
(8114)
Brief description of reconstruction and modernization
- New body sides (extrusions replaced with flat sides)
- Glued-on panelling
- New shape of mudguards – modified from CAS 32 - T815-PR2
- New enclosed rear compartment with cabinets for accessories on both sides and at rear
- Openings in the rear compartment and on both vehicle sides are closed with aluminium roller shutters
- Foam concentrate tank made of stainless steel plate
- Foam concentrate tank filler neck complete with collar for easy filling
- Electric water & foam concentrate level gauges, with indicators on left and right control panels
- Modified pumping equipment control panel
- Change in number of monitors: 1 pc instead of 2 pcs
- Modification of pumping equipment ball cocks acc. to up-to-date model
- Flap for suction from tank is pneumatically operated with possibility of emergency manual control
- Pump and ball cock drainages are discharging into one point underneath the vehicle body
- Installation of hose reel with rapid intervention equipment in the rear compartment
- Warning device VOAZ 12 with protective cover
- Front and rear side lamps
- Auxiliary blue lights on driver’s cab
- Side marker lamps
- Reflective boards on the rear wall
- Rear combined lamps ZKW
- Roller shutter limit switches and cabinet lighting
- Map reading light in front of officer’s seat
- Voltage converter 24 V/12 V - 18 A
- Antenna for two-way radio
- Battery-charging connection near the driver’s door
- Compressed air connection located close to the driver’s entry
- Temporary location of spare wheel on the top platform
- Rear part of the vehicle is not designed for installation of hitch for 900kg trailer
- Surface finish with BODY 2K autolack in the following colour combination: red RAL 3000 and white 1000
Ask us!
Would you like to be informed about the details of this product? Write to us and we will get back to you.
The CAS 32 – T148 6×6 Water Tender is a firefighting vehicle designed to carry a fire brigade crew (1+2), equipment and extinguishing media to extinguish fires of highly flammable substances by application of water or foam. The vehicle can be used by ordinary fire & rescue brigades, at airports, in industrial factories, chemical plants, refineries, mines, warehouses of flammable substances and in areas with a high risk of fire hazard, when fighting forest fires and in emergency situations.
Hotline - repairs, service